6 Type (channel group)
Here, you can assign selected channels to determined channel
groups (Types) as desired. Please confirm your selection with “OK”.
You can exit the menu by pressing the "EXIT“ key.
Installation (symbol: satellite antenna)
Sub-menu Description
Satellite Satellite selection
(example: Astra1 19° East)
LNB type Select LNB type
(standard setting is Universal)
22K(Hz) 22KHz activation
(Note: with LNB type Universal
activation occurs automatically)
DiSEqC Select DiSEqC level
DiSEqC switch Select DiSEqC order
Example:
Astra and Hotbird double reception
Astra = 1 / 4
Hotbird = 2/ 4
Deactivate for checking the motor
(invalidity)
Positioner By pressing the “OK“ key you will go to
DiSEqC motor checking menu. Please
refer to the operating manual of your
DiSEqC motor for help.
Antenna Setup
Polarity Horizontal, vertical, H/V (automatic
operation)
Auto Scan
(unique function
performable
without previous
knowledge)
Here you can scan a selected satellite (example: Astra1
19° East) completely to search for new channels. For this
purpose, no special information is needed. You can choose
between free-to-air channels and all TV and radio
channels.
The procedure is initiated via "Scan“.
Especially recommended for Türksat
TP scan (manual
channel scan)
With this scanning function, you can scan the preset
frequencies (transponders) individually. The transponder
details can be changed manually.
34
To Next Page
Loading...
