Technical specifications
Receiver
Dimensions in mm (W × D × H) 210 × 145 × 45
Weight in grams Receiver 660 g
Remote control 80 g (without batteries)
Input frequency range 950 MHz ~ 2'150 MHz
IF band width 55 MHz / 8 MHz (below 5MS/s)
LNB power supply 13V/18V GS, 0.30 A max.
Overload protection
LNB control 22 kHz ± 2 kHz, 0.6 V pp ± 0.2 V
DiSEqC control Version 1.0, Version 1.2, Tone-Burst A/B
Symbol rate 1 ~ 35 MS/s
Bit stream MPEG-2 ISO/IEC 115200 bit stream
specification
Input speed Max. 15 Mbit/s
Error correction (FEC) 1/2, 2/3, 3/4, 5/6, 7/8, auto
Video MPEG-2 MP@ML
Audio MPEG -1/2 audio layer 1 or layer 2
Aspect ratio 4:3 Letterbox, 4:3 PanScan, 16:9
Video resolution 720 x 576 (Pal), 720 x 480 (NTSC)
Audio mode Left, right, stereo, AC3 digital sound
Connection options
LNB IF input Type F, IEC 169-24
TV SCART (output only) Video CVBS, Audio L, R
VCR SCART (output and input) Video CVBS, Audio L, R
RCA (CINCH) Audio L,R
SPDIF, COAXIAL Digital audio output
Power supply
Input voltage power pack 100-240 V ~, 50/60 Hz
Input voltage of the receiver 11 – 14 Volt
Power consumption approx. 12 W (operation with Single LNB)
approx. 4 W (standby)
Operating temperature 0ºC ~ +40ºC
Storage temperature –40ºC ~ +65ºC
47
To Next Page
Loading...
