Page 6 Safety notes for electrical drives and controllers
2 Safety notes for electrical drives and
controllers
2.1 Used symbols
Information
Important information and notes.
Caution!
Nonobservance may result in severe property damages.
DANGER!
Nonobservance may result in property damages and in personal injuries.
Caution! Dangerous voltages.
The safety note indicates a possible perilous voltage.
2.2 General notes
In case of damage resulting from non-compliance with the safety notes in this manual, Metronix
Meßgeräte und Elektronik GmbH will not assume any liability.
Prior to the initial use you must read chapter 2 Safety notes for electrical drives and
controllers, starting on page 6 and chapter 7 EMC-compliant cabling, starting on
page 41.
If the documentation in the language at hand is not understood accurately, please contact and inform your
supplier.
Sound and safe operation of the servo drive requires proper and professional transportation, storage,
mechanical installation, and project planning – with a consideration of the risks as well as the protective
and emergency measures – plus the proper and professional electrical installation, operation, and
maintenance of the devices.
Only trained and qualified personnel is authorised to handle electrical devices and systems:
Mounting Instructions „Servo drives ARS 2100 SE“ Version 5.0
To Next Page
Loading...
Need help?
General
