Slurry Pump
WH16AA1LA00EN_01E.DOC JAN 04-W08
Care and maintenance
1/3
9.4 Lubrication
9.4.1
First-fill and re-packing after major servicing
Metso Minerals Slurry pumps are lubricated with SKF LGMT3 before dispatch. When
renewing or re-fitting the bearings, they must again be re-packed with grease of the same
specification as detailed in Table 9.4.1-1. The required quantity for each bearing is
specified in Table 9.4.1-2.
Characteristic Specification
Thickening agent : Lithium soap
Base oil viscosity at 40 °C : 120 cST
Base oil type : Mineral oil
Consistency NLGI : 3
Table 9.4.1-1 Grease specification
Frame size Grease quantity (g)
FR250
75
FR300
100
FR400
125
FR500
325
FR600
500
FR750
625
Table 9.4.1-2 Bearing lubrication - First fill & re-packing
To Next Page
Loading...
Need help?
General
