Need help?Do you have a question about the Metz MECABLITZ 28 CS-2 digital and is the answer not in the manual?
Details on the types of batteries suitable for operating the flash unit.
Instructions for correctly inserting and replacing batteries in the flash unit.
Procedure for powering the flash unit on and off using the main switch.
Using the slave mode for cameras without preflash technology.
Using the slave mode for cameras with preflash technology.
Adapting the slave mode individually to the camera's flash technology.
Configuring flash settings for cameras allowing manual control.
Configuring flash settings for cameras with automatic or fixed controls.
Operating the flash unit in automatic mode A.
Operating the flash unit in manual mode M.
Using the flash unit in Metz-Remote wireless mode.
Simplified flash operation mode for general use.
Setting the automatic f-stop for the flash unit.
Setting the ISO speed for the flash unit.
Indicating the reflector status (e.g., with/without diffuser).
Understanding the flash readiness indicator light.
Interpreting the correct exposure confirmation indicator.
Managing the automatic switch-off feature of the flash unit.
Switching the distance unit between meters and feet.
Adjusting flash delay for slave mode with preflash suppression.
Diagnosing and resolving issues when the slave flash unit fails to fire.
Troubleshooting underexposed images caused by flash issues.
Steps to take when troubleshooting efforts do not resolve the issue.
General| Brand | Metz |
|---|---|
| Model | MECABLITZ 28 CS-2 digital |
| Category | Camera Flash |
| Language | English |
To Next Page
