Metz Mecablitz 60 CT-1

Need help?

Do you have a question about the Metz Mecablitz 60 CT-1 and is the answer not in the manual?

Summary

Safety Instructions

Preparing the Flashgun for Use

Attaching the Flashgun to a Camera

Connect the flashgun to the camera using the sync cable or SCA adapter.

Power Supply

Details on using the 60-38 battery and handling spent batteries.

Switching the Flashgun On and Off

Instructions for powering the flashgun on and off using the main switch.

Flash-Ready Indication

How to identify when the flash unit is ready for operation.

Correct Exposure Indication

Understanding the exposure OK indicator for automatic and TTL flash modes.

Automatic Flash Mode

Manual Flash Mode

Bounce Flash

Bounced Flash in Auto;TTL Modes

Checking light sufficiency for selected aperture in auto/TTL modes.

Bounced Flash in Manual Mode

Establishing camera aperture for bounce flash in manual mode.

Winder;Motordrive Mode

Fill-in Flash in Daylight

Fill-in Flash in Automatic Mode

Using camera/meter for aperture/shutter speed, setting flash aperture lower.

Illumination and Wide-Angle Diffuser

Exposure Corrections

Exposure Correction in Auto Mode

Adjusting aperture for bright/dark backgrounds in automatic flash mode.

Care and Maintenance

Forming the Flash Capacitor

Procedure to maintain the flash capacitor by periodic powering on.

Technical Data

Optional Accessories

Disposal of Batteries