Need help?Do you have a question about the Metz MECABLITZ 40 CT 4 and is the answer not in the manual?
Energy-saving light output regulation for supershort recycle times.
Soft indirect lighting, adjustable in four directions.
Automatic exposure with choice of three apertures for depth-of-field.
Shows light sufficiency, useful for bouncelighting.
Optional sensor for close-up/portrait light measurement.
Initial use, charging, and attaching flash to camera.
Connecting flash to camera via hot shoe or sync cord.
Recommended shutter speeds for focal plane shutters.
Powering the unit and performing a trial flash.
Setting film speed and selecting apertures for automatic exposure.
Using guide numbers and distances for manual settings.
Using the wide angle diffusor for wider lens coverage.
Indirect lighting using swivel reflector and telecomputer.
Integrating flash with camera's automatic flash systems.
Wireless remote control using slave units.
Chart correlating film speed (DIN/ASA) with guide numbers.
Instructions for recharging the rechargeable battery.
Operating the unit directly from AC power supply.
Recommendations for maintaining unit performance.
General tips, including bouncelight surfaces and color effects.
Combining flash and daylight for backlit subjects.
Specifications like guide numbers, apertures, and flash duration.
List of available accessories for the flash unit.
General| Flash Modes | TTL, Manual, Multi |
|---|---|
| Power Source | 4 x AA batteries |
| Guide Number | 40 |
| Tilt Angle | Up to 90 degrees |
| Swivel Angle | 360 degrees |
| Compatibility | Various cameras via hot shoe or sync cable |
| Zoom Range | 24 - 105 mm |
To Next Page