Meyer Drive Pro - Snow Plow Operation Modes; Electro-Touch Control Operation; Over-the-Road Transport Guidelines

A.A. Pull vehicle into plow
assembly and push plow
assembly forward an
inch or two.
F.F. Attach crankstand to
lift frame.
E.E. Remove crankstand
from a-frame.
D.D. Adjust crankstand
until it is no longer in
contact with the ground.
C.C. Push back on lift
frame until both pins
spring through mount on
vehicle.
B.B. Twist handles on both
sides to engage spring
loaded pins.
G.G. Remove weather
cover on both ends and
connect both electrical
plugs.
(9)
Mounting Plow
NOTE:NOTE: Pictures may vary based on model