B.B. Push lift arm down until there is slack in the chain.
C.C. Remove crankstand
from lift frame.
D.D. Attach crankstand to
a-frame
F.F. While slightly pushing the lift frame towards vehicle pull
handles on either side to disengage pins then twist until the
leg locks the pin in the open position.
G.G. Disconnect both
electrical plugs and in-
stall weather cover on
both ends.
H.H. Back vehicle away
from plow assembly.
(10)
Dismounting Plow
A.A. Press down button
until oat light turns blue.
E.E. Adjust crankstand until
the crankstand comes in
contact with the ground
and then turn 1 to 2
revolutions.
To Next Page
Loading...
