(7)
Plow Assembly & Adjustments
Lift ChainsLift Chains
Attach the Lift Chain to the Lift Arm through the two hooks on the lift
arm. Adjust the lift chain at the lift arm so that there are 2-3 links of slack.
This ensures that the plow blade will lift fully and be able to follow the
ground contour while plowing.
Drop Speed AdjustmentDrop Speed Adjustment
Drop Speed Adjustment: Loosen jam nut and turn knob clockwise to slow
the drop of the plow and counter clockwise to speed the drop of the plow.
Tighten jam nut.
Drop Speed Adjustment
Hydraulic Fluid Level Hydraulic Fluid Level
Top o the unit to the ll line on the reservoir with Meyer M-1 Hydraulic
Fluid.
NOTE: Proper uid level is to the ll line on the reservoir. It must be checked
with the lift cylinder fully retracted.
To Next Page
Loading...
