Mount Plow To Vehicle
F. Attach crankstand to
lift frame.
E. Remove crankstand from a-frame.
D. Adjust crankstand until it is no longer
in contact with the ground.
B. Twist handle on driver side to disengage the notch that locks open
the pins.
G. Remove weather cover on male end and connect one piece electrical
plug. The spring loaded cover will lock one piece plug.
A. Pull vehicle into plow assembly and push plow assembly forward
an inch or two.
C. Push back on lift frame until pins spring thru mount on vehicle.
For Mounting and Dis-mounting instructional video’s please visit www.youtube.com/meyerproducts
(8)
Meyer Products assumes no responsibility for installations not made in
accordance with these instructions.
To Next Page
Loading...