To Next PageTo Next Page
Need help?Do you have a question about the Meyer WingMan 28300 and is the answer not in the manual?
Critical safety advice and warnings for operating the plow system.
List of tools required for the plow assembly process.
Instructions for properly connecting additional batteries.
Reference chart for bolt torque specifications in foot pounds.
Visual representation of plow assembly components with item numbers.
Detailed list of all parts, including part numbers and descriptions.
Specific parts list for WingMan 6'8" and 7'6" plow models.
Attaching pivot bar to moldboard with pivot pins, flatwashers, and cotter pins.
Securing eye bolts and trip springs to moldboard and pivot bar.
Installing plow markers using bolts, washers, and nuts.
Connecting and adjusting lift chain for proper plow contour following.
Instructions for routing and connecting the vehicle side wiring harness.
Connecting plow lights to vehicle's high and low beam functions.
Step-by-step guide for mounting the plow assembly onto the vehicle's receiver hitch.
Step-by-step guide for safely dismounting the plow assembly from the vehicle.
Procedure for adjusting the drop speed of the hydraulic unit.
Identification of solenoid valve colors and hose connections for the hydraulic unit.
Comprehensive checklist for pre-delivery inspection of the plow system.
Information on the location of serial number decals for the E-73 unit and moldboard.
General| Type | Two-Stage |
|---|---|
| Clearing Width | 28 inches |
| Engine | Briggs & Stratton |
| Throw Distance | Up to 40 feet |
| Starter Type | Electric |
