Mount Plow To Vehicle
For Mounting and Dis-mounting instructional video’s please visit www.youtube.com/meyerproducts
(7)
Meyer Products assumes no responsibility for installations not made in
accordance with these instructions.
6. Remove weather covers and connect
both electrical plugs.
WingMan 2" Receiver Mounting System – Mount/ON
2. Install receiver hitch pin and hair pin.
2
3
4. Remove crankstand from a-frame.
4
1.
Pull vehicle into plow assembly and push plow assembly forward an
inch or two.
1
5. Attach crankstand to lift frame.
5 6
3. Adjust crankstand until until it is no longer in contact with the ground.
6. Remove weather covers and connect
both electrical plugs.
To Next Page
Loading...