Need help?Do you have a question about the MFJ MFJ-1886TR and is the answer not in the manual?
Lists the components included: Loop Antenna, TR Bias Tee, Power Supply, and U-bolts for the MFJ-1886TR antenna system.
Specifies connecting the 12-14VDC, 500mA linear supply to the designated port on the MFJ-4113TR Bias-Tee.
Describes the port for RF input from your transceiver.
Identifies the terminal for the transmit antenna connection, which is active when the unit is off or unpowered.
Explains connecting the loop antenna to this port, cautioning against shorting the center pin or adding a balun to ground.
Details connecting an RCA cable to the transceiver's SEND or KEY output for amplifier keying.
Provides a detailed example of antenna grounding according to National Electrical Code, including wire gauge and connection points.
Emphasizes the extreme dangers of antenna installation, urging professional assistance and careful planning to avoid severe injuries or fatalities.
Guides users on selecting appropriate support and mounting methods for antennas, emphasizing safety and considering various installation types.
To Next Page
General
