MFJ MFJ-891 - AVG vs. PEP Mode; LED Backlight Control; Important Cautions; Handling and Environment

E. When switch to 'AVG', the meter reads average RF power.When switch to
‘PEP’, the meter reads Peak Envelope Power for use withSSB and AM
transmissions. In this mode, there will be a slow rise and decay time.
F. Push LED ON/OFF button when LED light is needed (in MFJ-891, it also
activate PEP active mode).
i Caution
1. Since the meter movementis very sensitive, avoid excessive
vibration or mechanical shock to the meter.
2. Watch the absolute maximum power could be applied to the meter by
different models you bought.
3. The meter must never be reverse connected. Always observe the
correct connections to transmitter and
antenna as indicated on the rear sockets.
4. Do not expose the meter to excessive temperatures, high humidity,
or strong magnetic fields.
5. Contact your local dealer for service. Dealer information is in the
back of user manual. C € RoHS ps4
Page6