MFJ MFJ-9234 - System Setup; System Setup Configuration

MFJ-9234 Mini Loop Tuner Instruction & Technical Manual
- 10 -
SYSTEM SETUP
SYSTEM SETUP CONFIGURATION
The MFJ-9234 Mini Loop Tuner
TM
setup configuration is simple and consists of the following
components:
• RF Generator (Transmitter or transceiver, 5-Watts minimum) with built-in SWR/Wattmeter
• MFJ-9234 Mini Loop Tuner
TM
• Coaxial cable(s)
• Wire cut to approximately 75% of a ¼ wavelength at the chosen resonant frequency
Figure 3 is a block diagram of the typical MFJ-9234 Mini Loop Tuner
TM
setup configuration.
Figure 3: Typical MFJ-9234 Mini Loop Tuner
TM
Configuration
Transmitter/
Transceiver
With
SWR/Wattmeter
Matching
Network
Loop
MFJ–9234 Mini Loop
Tuner