Need help?Do you have a question about the MFJ MFJ-989D and is the answer not in the manual?
Legal disclaimer regarding manual information and updates.
Details the five integrated station accessories: SWR/Wattmeter, Antenna Selector, Dummy Load, Tuner, and Balun.
Explains the use of a 9V battery or 12VDC external source for meter operation.
Identifies and describes the function of front panel controls like tuning capacitors, inductor, and selectors.
Details the purpose and connection types for rear panel ports like Transmitter, Coax, Bal Line, and Meter Lamp.
Provides advice on tuner placement, cable connections, grounding, and safety warnings.
Guides users on how to read power scales and calculate SWR using the meter.
Explains how the selector routes signals to different antenna outputs or the dummy load.
Details the two primary functions: normalizing transmitters and measuring power.
Describes the balun's construction and role in connecting balanced feedlines.
Explains the T-network's design and the "C-high L-low" rule for tuning.
Provides a detailed procedure for tuning the antenna for minimum SWR.
Discusses tuning with amplifiers and specific warnings for "BIG" amplifiers.
Covers tuning limitations, the C-high L-low rule, and the importance of logging settings.
Summarizes essential safety warnings for operating the tuner safely.
Addresses common problems like high SWR, arcing, RFI, and grounding.
Offers advice on antenna location and managing high-impedance loads.
Provides guidance on feedline adjustments and dipole feeding for better matching.
Lists contact details for MFJ technical service and factory support.
Explains the purpose and use of the tuner log chart for efficient setup.
Placeholder for user notes or additional remarks.
Outlines the warranty period, terms, proof of purchase, and service procedures.
To Next Page
General