Supplement for Cars with Impact-absorbing Bumpers
Panel and
The warning anh panel lamp holders are a push fit into the back of the instru-
warning lamps
ment and the warning lamps and are located in the positions shown.
Fig.
17
The lamps are accessible from below the fascia panel.
Instrument panel lamp bulbs.
A
2.2-watt screw fixing bulb. Remove the push-fit
bulb holders (1) from the instruments and unscrew the bulb (2).
Warning lamp bulbs.
A
2-watt miniature bayonet fixing bulbs. Remove the push-
fit bulb holders (3) from the lamps and remove the bulbs (4).
Volts Watts
Replacement
Pilot lamps (capless-type bulbs) . . . . 12 5
bulbs
Tail and stop lamps
.
. .
.
.
.
. . 12 5/21
Reverse lamps
.
.
. .
.
.
.
.
12
18
Direction indicators
....
. .
. . 12 21
Warning lamps-fascia
.
. . . . . 12 2
Warning lamp-heated rear window
.
.
12 2.2
Instrument illumination
.
.
. . . . 12 2.2
Cigar-lighter illumination
. .
.
. .
.
12 2.2
...
Courtesy lamp. . . . . . . 12 6
Interior lamp
.... . . . . .
.
12 6
....
Number-plate lamps . . .
.
12 6
Part No.
GLB 501
GLB 380
BFS
272
GLB 382
GLB 281
GLB 987
GLB 987
BFS
643
GLB 254
GLB 254
GLB 989
To Next Page
Loading...
