MG Midget 1979 User Manual

Describes the arrangement and function of the brake and accelerator pedals.

Explains the operation of the mechanical hand brake lever.

Details the gear lever, its positions, and reverse gear engagement.

Explains the ignition/starter switch, steering lock, and key usage.

Describes the speedometer, tachometer, coolant temperature, and fuel gauges.

Explains the function of various dashboard warning lights.

Details the dual circuit brake system and warning lamp.

Describes the function of the anti-theft warning buzzer.

Details operation of turn signals, headlamps, and horn.

Instructions for operating the windscreen washer and wiper system.

Describes lighting, hazard, blower, and cigar-lighter switches.

Guidance for starting, initial running, fuel choice, and filling.

Step-by-step guide for starting the engine, including checks.

Explanation of ignition and oil pressure warning lamps.

Details on temperature gauge, gear speeds, and tachometer usage.

Notes on wet brakes, vehicle loading, towing, and recovery.

Recommendations for improving fuel economy.

Details on keys, lubrication, doors, and cubby box operation.

Instructions for driving mirrors, anti-dazzle, and windows/ventilation.

How to open and close the bonnet and luggage compartment.

Maintenance of drain points and fitting the hard top.

Instructions for lowering and stowing the soft top (hood).

Step-by-step guide for raising the soft top (hood).

Instructions for fitting and using the tonneau cover.

Details on adjusting seat position and back rake.

Instructions for adjusting the vertical position of the head restraint.

Information on the warning system and proper seat belt wearing.

Description of system, controls, air flow, and usage.

Guidance for cleaning interior carpets, upholstery, body, and bright trim.

Details on the expansion tank, its cap, and pressure maintenance.

Procedure for checking coolant level and draining the system.

Instructions for filling the system and using anti-freeze.

Instructions for using the jack and its maintenance.

Procedures for pressed and wire type wheels.

Information on spare wheel and weekly checks.

Details on tyre markings, wear indicators, and maintenance.

Checking fluid levels in brake and clutch master cylinders.

Procedure for adjusting the brake pedal's free movement.

Details on front brake pads and rear brake shoe adjustments.

Procedure for inspecting rear brake linings.

Recommendations for periodic brake system maintenance.

Importance of polarity and battery maintenance.

Precautions for battery boosting and charging.

Precautions to prevent damage to the alternator.

Details on the location, types, and function of fuses.

Instructions for removing/fitting headlamp units and beam adjustment.

How to change bulbs for indicator and number plate lamps.

Procedure for changing bulbs in rear and side marker lamps.

How to replace bulbs for interior courtesy and luggage lamps.

Accessing and changing bulbs for warning and instrument panel lamps.

How to change bulbs for switches and brake failure warning lamp.

Replacing bulbs for hazard, seat belt, and cigar lighter illumination.

List of replacement bulbs and instructions for wiper arms.

Procedure for removing and fitting wiper blades.

Information on checking and refilling the washer reservoir.

Information on setting and checking ignition timing.

Instructions for cleaning and lubricating the distributor.

Procedure for checking, gapping, and replacing spark plugs.

How to check oil level, drain, fill, and replace the oil filter.

Information on fan belt tension and adjustment procedure.

Procedure for checking and adjusting valve rocker clearance.

Overview of crankcase, exhaust, and evaporative emission control systems.

Description of the crankcase breather and fume control system.

Details on exhaust emission control system components and function.

Description of the system for preventing fuel vapor pollution.

Checks for visual signs of malfunction and driving symptoms.

Procedure for removing and replacing adsorption canisters.

Drive belt tension for air pump and EGR valve servicing.

Checking and clearing restrictors in purge and vapour lines.

Ensuring correct refitting of engine and fuel tank filler caps.

General description of emission control systems specific to California.

Description of crankcase and exhaust emission control systems.

Description of the fuel evaporative loss control system.

Checks for visual signs of malfunction and driving symptoms.

Maintenance tasks for adsorption canisters, air pump, and EGR valve.

Checking restrictors in purge and vapour lines.

Ensuring correct refitting of engine and fuel tank filler caps.

Instructions for changing the air cleaner element.

Inspection of the air intake temperature control valve.

Procedure for cleaning the fuel pump filter gauze.

Checking damper oil level and carburetter tuning procedures.

How to check oil levels in the gearbox and rear axle.

Instructions for lubricating the propeller shaft sliding yoke.

Lubrication points for swivel pins and fulcrum pins.

Inspection of steering rack and setting front wheel alignment.

Specifications for vehicle dimensions and fluid capacities.

Details on wheel sizes, tyre types, and pressure specifications.

Information on vehicle weight distribution and towing limits.

Overview of dealer service and vehicle identification.

Items to check weekly by the driver.

Schedule for periodic maintenance services based on mileage.

Details of tasks included in the 'A' Service.

Details of tasks included in the 'B' Service.

Details of tasks included in the 'C' Service.

Details of tasks included in the 'D' Service.

Details of tasks included in the 'E' Service.

Chart showing recommended engine oil viscosity by temperature.

Specifications for synchromesh gearbox and rear axle oils.

Information on lubricating the steering rack and grease points.