MG midget mark 3 User Manual

Description of speedometer, tachometer, oil pressure, water temperature, and fuel gauges.

Operation of lighting, headlamp, and panel lamp switches.

Recommendations on fuel type and use of lead-free gasoline.

Steps for starting the engine, including choke and ignition checks.

Guidelines for starter operation duration and troubleshooting.

Proper use of the mixture control for starting and warming up.

How to warm up the engine efficiently after starting.

Advice on driving a cold engine and using gauges.

Interpretation of the ignition warning light's behavior.

Expected oil pressure readings and actions for low pressure.

Normal operating temperature and actions for overheating.

Recommended speeds and engine use for the first 500 miles.

Guidance on selecting gears for optimal engine speed.

How to dry brakes after driving in wet conditions.

Use of towing eyes and ignition lock position.

How to test the brake warning system and its light.

Considerations for overall vehicle weight and load distribution.

Location and function of fuse block and individual fuses.

Details on auxiliary and hazard warning line fuses.

Identifying blown fuses and checking for short circuits.

Importance of dynamic timing and electronic test equipment for settings.

Checking engine oil level using the dipstick and oil filler cap.

Procedure for draining the engine oil while the engine is warm.

Steps for refilling the engine with oil and checking the level.

Procedure for renewing the disposable oil filter cartridge.

How the system stores and disposes of fuel vapours.

Overview of crankcase, exhaust, and evaporative emission controls.

Warranty coverage and fuel type recommendations for emission systems.

Function of the crankcase breather outlet and oil separator.

Importance of non-venting filler caps for the evaporative loss system.

Components and function of the exhaust emission control system.

Checking and clearing obstructions in the purge line restrictor.

Replacing the air filter pad and the canister itself.

Procedure for renewing the gulp valve.

Tensioning and adjusting the air pump drive belt.

Renewing the air pump air cleaner element.

Regular checks for drive belts, hoses, fuel leakage, and caps.

Common driving issues indicating potential system malfunctions.

Renewing carburetter air cleaner elements.

Features aiding exhaust emission reduction in carburetters.

Topping up the piston damper with engine oil.

Steps for setting idle speed, mixture, and balance.

Detailed procedure for tuning carburetters, including jet and mixture adjustments.

Routine checks to be performed weekly or before a long journey.

Summary of services required at different mileage intervals.

Schedule for lubrication services based on mileage intervals.

Key engine maintenance tasks and their intervals.

Ignition system maintenance tasks and intervals.