Electrical
WIN
DSGREEN
WIPER
Arms
To reposition a wiper arm, slacken the screw (1). Tap the screw head to release
Fig. 11 the splined locking wedge (2),
and
withdraw the arm:
War
'ning
and Fascia. The warning and panel illum ination lamps are located in the back of the
panel lamps fascia panel in the positions shown. The bulbs are housed in holders which
are
Fig. 10 a press-fit into the back of the panel and are accessible from beneath the fascia.
Brake. To gain access to the warning lamp bulb, withdraw the holder
and
test
push assembly from the fascia panel. Gently press the switch rocker pivot lugs
(arrowed) inwards and withdraw the rocker f
rom
the casing.
, Console. To renew the hazard warning or seat belt warning lamp bulb; remove
the four console retaining screws and draw the ' console rearwards. The bulb
holder can then be with
dra
wn from the warning l
amp
.
Blades
Fig. 11
To renew a wiper blade pull the wiper
arm
away from the windscreen, push the
retainer (3) upwards and withd raw the blade from the arm with a gentle pull.
Insert the end of the
arm
into the slotted spring fastener of the new blade,
and
push the blade into engagement with the arm.
Washer
Volts Watts Part No .
Fig. 12
Replacement
Headlamp-seale
d beam
12
50/40
bulbs Sidelamp (with flasher)
'iz
5/21
GLB 380
Stop/tail
12
5/21
GLB 380
FUEL
PUMP
Reverse
12
18
BFS 273
Number-plate lamp
12
. 6
GLB
989
Direction indica
tor
12 21
GLB
382
Side m
arker
lamp, fron t and rear
12 4
BFS 222
Ignition warning .. 12
2
GLB 281
Main
beam
12 2
GLB 281
Direction indicator warning lamp
12
2·2
GLB
987
Brake warning lamp
12
1·5
GLB
280
Panel illumination lamp . .
12
2·2
GLB
987
Cigar-lighter illumination
12
2·2
BFS 643
Luggage compartment lamp
12
6
GLB
254
Courtesy lamp
12
6
GLB 254
Hazard
warning lamp
12
-2·2
GLB 987
Seat belt warning lamp
12 2
GLB 281
The electric
pump
for the windscreen washer is mou nted on the left-
hand
side
of the engine compartment bulkhead. The fluid flow is indicated on the
pump
just
above the fluid connections.
Fuel is delivered to the carburetters by an S.U. electric fuel pump. The pump is
situated beneath the luggage compartment on the right-hand side.
Fig. 12
~Jo/)I
U
,/f~
,
.
~
Blades To renew a wiper blade pull the wiper
arm
away from the windscreen, push the
Fig. 11 retainer (3) upwards and withd raw the blade from the arm with a gentle pull.
Insert the end of the
arm
into the slotted spring fastener of the new blade,
and
push the blade into engagement with the arm.
Fig. 11
Fig . 10
Replacement
Headlamp-seale
d beam
bulbs Sidelamp (with flasher)
Stop/tail
Reverse
Volts
12
'iz
12
12
Watts
50/40
5/21
5/21
18
Part No .
GLB 380
GLB 380
BFS 273
Washer
The electric
pump
for the windscreen washer is mou nted on the left-
hand
side
Fig. 12 of the engine compartment bulkhead. The fluid flow is indicated on the
pump
just
abo ve the fluid connections.
To Next Page
Loading...
