... 12
07 Installation - Precautions
●
#
When the cable is connected or disconnected, the power must be turned off.
●
#
Because the sheath can be peeled off or melt, avoid spots with high temperature and excessive pressure when
tucking the cable.
●
#
Note that the company will not be held responsible for res caused by wrong product installation.
●
#
Please choose a bright, even surface for installation after turning the ignition off.
●
#
Check rst whether the front and interior videos are stored normally before completing the installation (tuck).
●
#
Avoid installing the product in a spot that obstructs the driver’s view.
●
#
Check whether the SD card is inserted before plugging the product in.
●
#
Please hide the tucked cables for safety and aesthetic purposes.
●
#
Keep the installed front glass clean.
●
#
After installation, remove the protective lm of the front and interior camera lenses. Ensure that they are clean
before using them.
To Next Page
Loading...