Need help?Do you have a question about the MHG Heating 15 and is the answer not in the manual?
Information on gas pipe size, isolation valves, and pressure requirements.
Guidance on connecting the heating flow and return pipes, including pressure limits.
Instructions for connecting the condensate waste pipe and syphon.
Guidance on system design, including water pressure and expansion vessels.
Details electrical connection requirements and wiring diagrams.
Comprehensive unit to control up to twelve boilers, with heating and DHW control.
Typical installation serving heating only, with notes on internal pump usage.
Single boiler installation for heating and DHW (priority) via a 3-port valve.
Installation with mixing header, individual charging pumps for heating and DHW.
Installation serving two heating zones and DHW with individual charging pumps.
Utilizes AGU2.500 module for two heating zones and DHW with mixing valve.
Uses RVA63 controller for two heating zones and DHW with mixing valves.
Installation with AGU2.500 and RVA63 serving four heating zones and DHW.
Essential checks before commissioning, including system flushing and gas supply.
Procedure for initial firing and burner adjustment to ensure safe operation.
Information on identifying and resetting boiler faults and error codes.
Tasks to be undertaken before commencing any service or maintenance work.
General| Mounting | Wall-mounted |
|---|---|
| Heating Capacity | 15 kW |
| Efficiency | 93% |
| Fuel Type | Natural Gas |
| Dimensions | 700 x 400 x 300 mm |
To Next Page
