EasyManua.ls Logo

Mi-T-M THE CHORE MASTER CM Series - User Manual

Mi-T-M THE CHORE MASTER CM Series
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
CM-Cold Water Direct Driven Operator’s Manual 1
©
Copyright 2016 Mi-T-M Corporation
®
Form #37-1363-E/S-032416
CM-SERIES
OPERATION MANUAL
COLD WATER DIRECT DRIVEN
PRESSURE WASHER
CAUTION
RISK OF INJURY!
READ MANUAL BEFORE OPERATING!
This manual is an important part of
the pressure washer and must
remain with this unit!
THE CHORE MASTER
®
Question and Answer IconNeed help?

Do you have a question about the Mi-T-M THE CHORE MASTER CM Series and is the answer not in the manual?

Summary

Introduction to the Pressure Washer

Safety Warning Conventions

Explains signal words (DANGER, WARNING, CAUTION) and symbols used in the manual.

Serial Number Recording

Instructions to record the unit's serial number and contact information for service.

Important Safety Warnings

Fire and Ventilation Precautions

Details safe operating environments and fuel handling to prevent fire and asphyxiation.

Engine Fuel Tank Safety

Specific safety rules for refueling the engine to prevent fire hazards.

Spray Precautions

Guidelines for safe operation of the spray gun and handling high-pressure streams to avoid injury.

Detergent Cleaning Precautions

Rules for using cleaning agents with the pressure washer safely.

Miscellaneous Safety Precautions

General safety rules for operation, children, freezing, and unit handling.

Adjustment Precautions

Safety measures to follow when making adjustments or performing maintenance on the unit.

Unit Features

Features Listing and Diagram

Identifies and labels key components of the pressure washer with a visual diagram.

Safety Decals

Specific Safety Decals

Details warnings on engine fuel, injection risk, hot mufflers, and general operating statements.

Installation and Preparation

Proper Attire

Recommends appropriate clothing and safety gear for operating the pressure washer.

Unit Setup Guidelines

Instructions for placing and preparing the unit on a level surface for operation.

Engine Fuel Tank Preparation

Guidance on safely fueling the unit, including fuel type and handling.

Nozzle Selection and Review

Explains different spray nozzles, their patterns, and usage.

Nozzle Connection Procedure

Details how to safely connect and disconnect spray nozzles using the quick-connect fitting.

Unloader Valve Information

Information about the factory preset unloader valve and its adjustment.

Water Supply Requirements

Details water supply hose selection, inlet strainer cleaning, and connection.

Handle Installation Guide

Step-by-step instructions for assembling the unit's handle.

Thermal Relief Valve Function

Explains the function of the thermal relief valve in protecting the pump from overheating.

Pre-Start Inspection Checklist

A checklist of essential checks before starting the unit for safe operation.

Operating Instructions

Priming the Pump

Steps to prime the pump on initial start-up or after water supply disconnection.

Unit Start-Up Procedure

Detailed procedure for starting the engine and unit, including safety checks.

Cleaning with Detergents

Guide on using detergents for cleaning, including preparation and application.

Unit Shutdown Procedure

Steps for safely turning off the unit, including pressure relief and draining.

Storage and Maintenance

Engine Maintenance

Refers to the engine manual for specific engine maintenance procedures.

Pump Maintenance Schedule

Recommendations for pump oil changes and checking oil levels.

Nozzle Inspection and Replacement

Information on nozzle wear, pressure loss, and replacement criteria.

Quick Coupler Care

Maintenance and repair of quick coupler O-rings to prevent leaks.

Winterizing the Unit

Procedure to protect the unit from freezing temperatures for storage or transport.

Troubleshooting Guide

Engine Starting Issues

Addresses problems with the engine failing to start, including frozen components.

Pressure and Flow Problems

Covers lack of discharge or low/fluctuating pressure due to supply or component issues.

Leakage and Oil Issues

Details water leaks, oil appearance, and oil leaks from various unit parts.

Detergent System Malfunctions

Troubleshoots issues with detergent siphoning and backflow in the system.

Gun and Nozzle Problems

Addresses malfunctions related to the trigger gun and nozzle connection or operation.

Statement of Warranty

Warranty Coverage Periods

Outlines the duration of warranty coverage for different pressure washer parts.

Warranty Exclusions and Voiding Conditions

Lists conditions that can void the warranty or are not covered.

Service and Warranty Contact Information

Provides contact details for service or warranty considerations.

Mi-T-M THE CHORE MASTER CM Series Specifications

General IconGeneral
BrandMi-T-M
ModelTHE CHORE MASTER CM Series
CategoryPressure Washer
LanguageEnglish

Related product manuals