Mi-T-M GC-3004-4MGH - User Manual

Discusses hazards related to fuel, sparks, and battery usage, with prevention measures.

Covers hazards of inhaling engine exhaust and dangerous vapors, emphasizing ventilation.

Details dangers of high-pressure spray penetrating skin and handling spray nozzles.

Warns against directing water spray at electrical installations or touching live components.

Addresses the danger of touching hot engine mufflers and adjacent areas.

Explains risks from unit malfunction, freezing, or using incorrect components.

Highlights dangers associated with moving parts on the pressure washer.

Covers injuries from detergents, propelled debris, loss of balance, and improper operation.

Lists and identifies various components of the pressure washer.

Advises on appropriate clothing and protective gear for safety during operation.

Provides instructions on placing the unit, ventilation, and securing it.

Details guidelines for safely fueling the engine, including octane and storage.

Describes different quick-connect nozzles, their spray patterns, and uses.

Explains how to safely connect and disconnect spray nozzles from the lance.

Outlines requirements for water source, hose, filter, and pressure.

Notes that the unloader is factory preset and should not be adjusted by the user.

Explains the function of the heat dump valve to protect the pump from overheating.

Lists essential checks before starting the unit, including oil, hoses, and leaks.

Details the essential steps for priming the pump before initial start-up and after use.

Guides the user through the engine start-up process and initial checks.

Explains the optional feature for applying cleaning solutions with the unit.

Provides instructions on how to properly turn off the pressure washer after use.

Details maintenance procedures specific to the engine component.

Outlines oil change intervals and recommendations for the pump.

Explains periodic cleaning of the water strainer to prevent pump issues.

Discusses nozzle wear and when replacement is necessary due to pressure loss.

Describes O-ring seal deterioration in quick couplers and replacement.

Provides steps for adjusting belt tension to maintain optimal performance.

Details procedures to protect the unit from freezing temperatures during storage.