(EN) WARRANTY
The warranty will be valid only when accompanied by the invoice of purchase.
Michelin, for its own account or an authorized Company, sure to be delivering to consumers a PRODUCT FOR HOUSEHOLD in perfect condition and adequate
for the purposes intended.
Under the terms and limits of the law No. 8078 of 11 September 1990, any and all possible manufacturing defect may be claimed within ninety (90) days from
the date of delivery of the machine.
Michelin, grants beyond the legal guarantee, a supplementary cover, reaching a total of 1 year warranty (90 days plus 9 months statutory warranty complemen-
tary), also evidenced by the invoice of purchase.
The warranty covers materials, construction and conformity defects during the warranty period, during which time the manufacturer will replace defective parts
and repair or replace the product if excessively worn in normal use.
The warranty does not cover components subject to normal wear (valves, pistons, water gasket, oil gasket, springs, O-rings, accessories such as hoses, guns,
brushes, wheels, etc.).
The warranty does not cover defects caused by or resulting from:
- incorrect use, abuse or neglect,
- trade, professional or hire use,
- failure to service and maintain the unit as specified in the user’s manual,
- unauthorised repairs,
- use of non-original accessories/spare parts,
- damage incurred during shipping or due to foreign objects or substances and accidental damage,
- warehousing and stock keeping problems.
To register the warranty, the customer must provide proof of purchase.
For service, contact the dealership where the machine was purchased
10
HOW TO AVOID DAMAGING SURFACES
Caution - Danger!
10.1 Washing tyres with a high pressure washer can cause damage to the tyre and be dangerous.
10.2 Never direct high pressure jets directly at the tyre.
10.3 Always use the pressure washer at the lowest pressure setting when cleaning around the wheels and tyres.
10.4 Never use the “Turbo Lance” for washing any part of the vehicle.
10.5 For further informations read section:
“7.7 Recommended cleaning procedure”.
Technical Data (EN) Unit
MPX 150 RG MPX 150 RG
Output gpm - l/min
1.85 - 7 1.85 - 7
Pressure psi - MPa 1595 - 11 1595 - 11
Maximum pressure psi - MPa 2176 - 15 2176 - 15
Power W 2100 1900
T° input °F - °C 122 - 50 122 - 50
Maximum input pressure psi - MPa 145 - 1 145 - 1
Repulsive force of the gun to the maximum pressure N 18 18
Motor Insulation - Class F Class F
Motor Protection - IPX5 IPX5
Voltage V/Hz 220/60 127/60
Maximum allowed net impedance Ω - -
Sound level (K=3dB(A)) :
L
PA
(EN 60704-1) dB (A) 75.6 75.6
L
WA
(EN 60704-1) dB (A) 84 84
Unit vibrations (K=1,5m/s
2
) : m/s
2
1.75 1.75
Weight kg 19 19
MODEL SERIAL NUMBER
DECLARATION OF CONFORMITY
EN
We declare under our sole responsibility that this
product is in conformity with the following
standards or standardized documents
EN 60335-1 - EN 60335-2-79; EN 55014-1; EN 55014-2;
EN 61000-3-2;EN 61000-3-3; EN 61000-3-11; EN 60704-1
In accordance with the regulations:
2006/42/CE
2006/95/CE, 2002/95/CE, 2002/96/CE, 2004/108/CE, 2000/14/CE
Name and address of the person responsible for issue of
the technical dossier:
Stefano Reverberi / AR Managing Director
Via ML King, 3 - 41122 Modena, Italy
Date: 13.03.2012
MODENA (I)
Stefano Reverberi
Managing Director