PROPER CARE, MAINTENANCE AND REPAIR
PLASMA30 Use and Care
Do not modify the PLASMA30 in any way. Unauthorized modification may impair the
function and/or safety and could affect the life of the equipment. There are specific
applications for which the PLASMA30 was designed.
• Always check of damaged or worn out parts before using the PLASMA30.
Broken parts will affect the PLASMA30 operation. Replace or repair damaged or
worn parts immediately.
• When PLASMA30 is not in use, store it in a secure place out of the reach of
children. Inspect it for good working condition prior to storage and before re-use.
Caring for the Environment
When a tool is no longer usable it should not be disposed of with household waste,
but in an environmentally friendly way. Please recycle where facilities exist. Check
with your local council authority for recycling advice.
Recycling packaging reduces the need for landfill and raw materials. Reuse of recycled
material decreases pollution in the environment. Please recycle packaging where
facilities exist. Check with your local council authority for recycling advice.
Transport and Storage
• Hold the handle or the bottom to move it.
• The machines should be firmly secured during transportation.
• The machines should be stored out of the rain.
• Keep notice of Attention sign on the packing box.
Always have power disconnected when working
on internal components.
Do not touch or handle PC board without being properly
! WARNING
grounded with a wrist strap. Put PC board in static proof bag to
move or ship.
Do not put hands or fingers near moving parts such as drive
To Next Page
Loading...
