Relay type: P341 …
Software
Version
Major Minor
Hardware
Suffix
Original Date
of Issue
Changes
S1
Compatibility
Technical
Documentation
Description of
30 A J Nov 2004
Not released to production.
Enhanced main processor board
Company name change. 'ALSTOM' changed to 'MiCOM' in
default Plant Reference cell and 'ALSTOM P' changed to
'MiCOM P' for ASDU5 message type, IEC protocol.
User interface enhancements - larger 100x33 pixel graphical
display of 3 lines x 16 characters + 2 new buttons, direct
access keys.
Control Input enhancements. Selection of latched or pulsed
mode, Control Input labels added, disturbance recorder
trigger from control inputs.
16 PSL Timers (previously 8)
Platform alarms mapped to the DDB (Alarm Status 3)
Time synchronization using an opto input
Opto input power frequency filter control, enabled/disabled.
Courier over EIA485 can be selected for the 1st rear port in
addition to existing K-Bus configuration.
Transmission of the first rear port protocols
(MODBUS/Courier/DNP3.0) using the fiber-optic port
(IEC60870-5-103 previously available).
V2.11 or later P341/EN M/E33
To Next Page
Loading...
