To Next PageTo Next Page
Need help?Do you have a question about the MICRO-MARK MicroLux 84630 and is the answer not in the manual?
General| Brand | MICRO-MARK |
|---|---|
| Model | MicroLux 84630 |
| Category | Power Tool |
| Language | English |
Advice on preventing electric shock by proper grounding and avoiding water.
Recommendations for avoiding hazards from rotating parts and ensuring secure workpieces.
Guidance on lubrication, belt tension, and cleaning for sustained machine performance.
Using the machine only for its intended purpose and within its rated capacity.
Emphasizes unplugging before adjustments and wearing safety glasses during operation.
Details on table travel, spindle, power, speed, capacities, weight, and dimensions.
List of included tools and parts with quantities for the milling machine.
Guidance on selecting a suitable location and securely mounting the milling machine.
Essential checks before powering on the machine to ensure safety and proper function.
Step-by-step guide for powering on and initially operating the milling machine.
What to do when the machine shuts down due to overload, including error indication.
Daily and seasonal tasks to keep the machine in good working order and prevent issues.
Guidelines for recording repairs, performing them safely, and seeking assistance.
Proper handling and care for cutting tools and accessories for optimal performance.
Identification of parts requiring grease and oil for smooth operation and rust prevention.
Identification and labeling of key external components of the milling machine.
Information on connecting, disconnecting, and operating the machine's electrical system.
Visual representation of how the machine's parts are assembled.
Comprehensive list of all machine parts with item numbers, names, and quantities.
Step-by-step instructions for safely fitting and removing the taper shank and chuck.
How to use limit blocks to control the travel range of the headstock.
Procedure for adjusting the tilt angle of the headstock using lock nuts.
Method for adjusting gibs (wedges) to eliminate play in slide mechanisms.
Steps for performing drilling or deep milling operations, including speed and depth.
Instructions for setting up and performing face milling operations on the machine.
Guidance on selecting appropriate spindle speeds for different materials and hole sizes.
Items to check before powering on the machine for safe and proper operation.
Important safety reminders and conditions that may cause machine shaking.
Table detailing recommended wire size for extension cables based on length and amperage.
Specifications of the power source and safety measures for plugging in the machine.
