2
WARNING!
Some dust created by power sanding, sawing, grinding, drilling and other construction activities can contain
chemicals known to the state of California to cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
Lead from lead-based paints,
Crystalline silica from bricks and cement and other masonry product, and
Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures vary, depending on how often you do this type of work. To reduce your exposure
to these chemicals, work in a well ventilated area, and work with approved safety equipment, such as dust masks
that are specially designed to filter out microscopic particles.
CHAPTER 1 • SPECIFICATION
1-1 Machine specifications
1-2 Packing list of accessories
CHAPTER 2 • MACHINE INSTALLATION
2-1 Fundamental locating of the machine
2-2 Preparation before operation
2-3 Starting and running the machine
2-4 Machine overload
CHAPTER 3 • MAINTENANCE
3-1 Preventative and maintenance
3-2 Maintenance of cutter and taper shank
3-3 Mechanics lubrication
CHAPTER 4 • MACHINE STRUCTURE
4-1 External features
4-2 Assembly and parts
CHAPTER 5 • MECHANISM ADJUSTMENT
5-1 Installation and removal of taper shank
5-2 Travel adjustment
5-3 Adjust tip angle of headstock
CHAPTER 6 • OPERATION AND NOTICE FOR USE
6-1 Method of operation
6-2 Operation notes
CHAPTER 7 • POWER CONNECTION & ELECTRICITY
7-1 Power connection/disconnection & Operation
7-2 Electrical circuit diagram
CONTENTS
To Next Page
Loading...