EasyManua.ls Logo

Micro Motion CDM100P - Explosion-Proof;Flameproof or Non-Hazardous Output Wiring

Micro Motion CDM100P
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Transmitter outputs (continued)Table 3-1:
Transmitter version
Output channels
A B C
Discrete 4–20 mA + HART Discrete output Modbus/RS-485
Processor for remote-mount 2700
FOUNDATION fieldbus
Disabled Disabled Modbus/RS-485
3.2 Explosion-proof/flameproof or non-hazardous
output wiring
3.2.1 Wire the Analog outputs version in an explosion-proof/
flameproof or non-hazardous area
CAUTION!
Meter installation and wiring should be performed by suitably trained personnel only in
accordance with the applicable code of practice.
Procedure
Wire to the appropriate output terminal and pins (see Figure 3-1).
Wiring
16 Micro Motion Compact Density Meter

Other manuals for Micro Motion CDM100P