2 Mounting
Topics covered in this chapter:
• Mount the meter
• Rotate the electronics on the meter (optional)
• Rotate the display on the transmitter (optional)
2.1 Mount the meter
Use your common practices to minimize torque and bending load on process connections.
Tip
To reduce the risk of condensation or excessive moisture, the transmitter conduit opening should
not point upward (if possible). The conduit opening of the transmitter can be rotated freely to
facilitate wiring.
CAUTION!
Do not lift the meter by the electronics. Lifting the meter by the electronics can damage the
device.
Mounting
Installation Manual 11
To Next Page
Loading...