Micro Seiki BL-111 - Assembling the platter; Mounting the platter

«Assembling
the
platter
Stand
the
platter
vertically,
take
out
the
accessory
drive
thread
‘©
Mounting
the
platter
and
then
attach
it
to
the
bottom
of
the
platter.
Pass
one
end
of
the
Use the accessory handles to take out the platter. Remove one of thread loop over the threading angle. (Photo 4)
the handles, tighten the threading angle together with the butterfly
nut accessory to the handle and mount. (Photo 3)
Threading angle
Photo 3.