Micro Seiki BL-111 - Speed selection and adjustments

Speed selection and adjustments
©
Power
switch
When
this
switch
is
set
to
the
ON
position,
the
power
is
supplied
to
the
turntable
and
the
platter
starts
to
rotate.
‘* Speed adjustment knob
To adjust the speed, place the accessory
strobo mat on the platter. It is possible to
‘nake the platter rotate up to 6% (semitone
pitch) slower or faster than the rated rota:
tional speed. The speed is increased in the
“B* direction and reduced in the
tion.
'* Speed selector switch
Every time this switch is depressed, the
speed alternates between 33 and 45 rpm.
Select the position in accordance with the
rated speed of the record being played.
When the power switch is set to ON, the
speed is automatically set to 33-1/3 rpm.