5 of 20 IM-5000E-USA Rev A, 2021-01
WARNINGS AND CAUTIONS
The following terms are used to identify precautions that will help avoid accidental injury to patients
or personnel, or to prevent product damage:
WARNING: Indicates a risk to the safety of patients or hospital personnel.
CAUTION: Indicates a risk of damage to the system/instrument.
CAUTION: Federal Law (U.S.A.) restricts this device to sale by or on the order of a physician or
properly licensed practitioner.
CAUTION: All personnel should become familiar with this manual before using the instruments
in any procedure or during reprocessing. Personnel who are trained should include,
but are not be limited to, members of the surgical team, bioengineering department,
and central processing personnel.
WARNING: Irrigation must be used when cutting bone in order to ensure that the temperature at
the cutting accessory does not exceed 41°C / 105.8°F
WARNING: Use irrigation to prevent overheating.
WARNING: Verify that accessories are secure before use.
WARNING: Monitor the temperature of the nose section.
WARNING: Risk of pinching from moving parts.
WARNING: Risk of wrapped tissue from rotating parts.
WARNING: Risk of kick-back from high-torque devices.
WARNING: See IM-5025 for operation of the Electric Instrument Control Console.
WARNING: Ensure that there is no electromagnetic interference between the devices in this
manual and other devices in use. See IM-5025 for EMC information.
WARNING: When inserting blades, burs, rasps or twist drills, the coupler should be attached to
the handpiece, and the throttle lock should be set to LOCKED.
WARNING: Do not activate a powered instrument without first inserting the proper blade, bur,
rasp or twist drill.
WARNING: Inspect all system components for damage, corrosion, or excessive wear. Do not use if
any of these conditions are present. Contact MicroAire for service.
WARNING: If corrosion or debris are detected in or on the instrument, the instrument is
contaminated. Replace the instrument, or remove it from the sterile field to be
reprocessed.
WARNING: Do not use single-use accessories that are dull or damaged.
CAUTION: When connecting electric instrument cables, align the dots and gently push the
connections together without twisting.
To Next Page
Loading...
