EasyManua.ls Logo

MicroBT WhatsMiner M20S - User Manual

MicroBT WhatsMiner M20S
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1 / 32
WhatsMiner M20S Operation
GuideSimplified Version)V1.0
Shenzhen MicroBT Electronics
Technology Co.,Ltd
Question and Answer IconNeed help?

Do you have a question about the MicroBT WhatsMiner M20S and is the answer not in the manual?

Summary

M10 S Product Introduction

Whats Miner M20 S Product Overview

Introduces the Whats Miner M20S as a blockchain server artifact with key parameters.

Miner Connection and Racking Safety Notes

Miner Connection Procedures

Detailed instructions for connecting miner components, emphasizing correct wiring.

Power Supply and Adapter Board Wiring

Power Supply and Adapter Board Wiring

Correct connection of power supply and adapter board control wires, avoiding incorrect insertion.

Fan Connection

Fan Connection

Procedure for connecting the 6-pin fan wire to the miner's control board.

Hash Board and Adapter Board Connection

Hash Board and Adapter Board Connection

Ensuring proper seating of hash board and adapter board sockets for reliable contact.

Copper Busbar Connection Safety

Copper Busbar Connection Safety

Guidelines for connecting power supply copper busbars to prevent short circuits and ensure proper contact.

Product Connection Check

Final Connection Check

Verifying all miner connections and screw tightness before powering on.

Miner Handling and Racking Safety

Miner Handling and Racking Safety

Safety precautions for handling and racking the mining equipment to prevent physical damage.

Miner Configuration Environment Preparation

Configuration Equipment List

List of essential tools and hardware required for miner configuration.

Pre-Power On Checks and Connection

Network Environment Configuration

Details on setting up the network environment, including DHCP and NTP server requirements.

Miner Data Configuration

Finding Miner IP Address with WhatsMinerTools

Step-by-step guide to locate the miner's IP address using the WhatsMinerTools software.

Verifying Miner IP and MAC Address Broadcast

Verifying Miner IP and MAC Address Broadcast

How to verify the miner's IP and MAC address broadcast using the control panel and software.

Pool, Worker, and NTP Server Configuration

Configuring Mining Pool and Worker Details

Steps to set up the mining pool address and worker name for operation.

Static IP Address Configuration

NTP Server Address Modification

Optional procedure to modify the NTP server addresses for accurate time synchronization.

Miner Operation Status Monitoring

Miner Operation Status Monitoring

Procedures for checking the miner's operational status, performance, and environmental conditions.

Batch Configuration, Status Check, and Firmware Upgrade

Batch Configuration, Status Check, and Firmware Upgrade

Utilizing WhatsMinerTool for bulk configuration, status monitoring, and firmware updates.

Miner Disassembly and Installation

Control Panel Disassembly Guide

Step-by-step instructions for safely removing the miner's control panel.

Control Panel Installation Procedure

Control Panel Installation Procedure

Detailed steps for correctly reinstalling the miner's control panel.

Power Supply Unit Disassembly and Installation

Power Supply Unit Removal

Instructions for safely removing the power supply unit from the miner chassis.

Power Supply Unit Installation

Power Supply Unit Installation

Steps for correctly reinstalling the power supply unit and connecting its components.

Hash Board Disassembly and Installation

Hash Board Removal Instructions

Guide on how to remove a hash board from the mining machine.

Hash Board Installation Procedure

Hash Board Installation Procedure

Steps for correctly installing a hash board into the miner chassis.

MicroBT WhatsMiner M20S Specifications

General IconGeneral
BrandMicroBT
ModelWhatsMiner M20S
CategoryComputer Hardware
LanguageEnglish

Related product manuals