Need help?Do you have a question about the MicroBT WhatsMiner M3 and is the answer not in the manual?
General| Brand | MicroBT |
|---|---|
| Model | WhatsMiner M3 |
| Category | Computer Hardware |
| Language | English |
Essential wiring guidelines for power, fan, and data cables to prevent miner damage.
Key considerations for safely moving and setting up the miner hardware.
List of necessary tools including computers, switches, and servers for miner setup.
Visual guide illustrating the network topology for miner connectivity.
Steps to discover the miner's IP using WhatsMinerTools and control board indicators.
Instructions for launching and using WhatsMinerTools for miner detection.
Confirming the miner's network identity through software and device status.
Guide to assigning a fixed IP address to the miner via its web interface.
Setting up time synchronization and connecting to mining pools with worker details.
Procedure for updating the NTP server address for accurate time synchronization.
Configuring mining pool URLs, worker names, and passwords for operation.
Navigating to the CGMiner status screen for real-time miner monitoring.
Reviewing hash rate, fan speed, pool connection, and hash board temperatures.
Addressing issues related to temperature, fan speed, and cable connections affecting performance.
Using WhatsMinerTool for mass configuration, status checks, and firmware updates.
To Next Page
