EasyManua.ls Logo

Microfluidics MICROFLUIDIZER LV1 Series - User Manual

Default Icon
61 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
MODEL LV1 SERIES
MICROFLUIDIZER
®
PROCESSOR
User Manual
30 Ossipee Rd
P.O. Box 9101
Newton, MA 02464-9101
Phone 617-969-5452
Fax 617-965-1213
mixinginfo@mfics.com
www.microfluidicscorp.com
Part No. 85.0098

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Microfluidics MICROFLUIDIZER LV1 Series and is the answer not in the manual?

Summary

Chapter 1: Introduction

Inside this Manual

Provides an overview of the manual's structure and support information.

Customer Support

Information on how to contact Microfluidics for assistance and further support.

Warranty

Details on the warranty terms and conditions provided with the equipment.

Chapter 2: Overview

General Description

Introduces the LV1 Series Microfluidizer Processor and its applications.

Major Components

Identifies and briefly describes the main parts of the Microfluidizer unit.

Principle of Operation

Explains how the Microfluidizer Processor generates pressure and processes fluids.

Controls and Connections

Describes the front and rear panel controls, valves, gauges, and connections.

Chapter 3: Operation

Safety Warnings & Cautions

Important safety guidelines and warnings to prevent injury and equipment damage.

Site Preparation

Instructions for preparing the operating site, including checks and clearances.

Charging an Accumulator

Step-by-step procedure for safely charging the unit's nitrogen accumulator.

Operating the Equipment

Detailed steps for running the Microfluidizer Processor for processing and priming.

Duty Cycle

Information on the processor's operational limits to prevent overheating and damage.

Chapter 4: Maintenance

Replacing Piston Seal Assembly

Procedure for removing and replacing the piston seal assembly for leak issues.

Cleaning Components

Guidelines for thoroughly cleaning components during maintenance procedures.

Replacing the Hydraulic Oil

Instructions for changing the hydraulic oil at specified intervals or conditions.

Coned and Threaded Connections Maintenance

Guidance on maintaining and troubleshooting high-pressure connections.

Chapter 5: Troubleshooting

Monitoring the Pressure

Steps to establish a reference pressure point for system checks.

Maintaining Connections and Fittings

Procedures for ensuring the integrity of high-pressure connections to prevent leaks.

Appendix B: Tool & Spare Parts List

Standard Tool Kit

List of tools provided with the LV1 unit for operation and maintenance.

Standard Spare Parts Kit

List of essential spare parts recommended for the LV1 unit.

Appendix D: Fluid Compatibility Tables

The Elastomers

Information on the chemical compatibility of various elastomer materials.

The Plastics

Information on the chemical compatibility of various plastic materials.

Appendix E: Mobil Product Data Sheet

Description

Overview of Mobil DTE 20 Series hydraulic oils and their development.

Health and Safety

Safety information and handling precautions for Mobil DTE 25 hydraulic oil.

Microfluidics MICROFLUIDIZER LV1 Series Specifications

General IconGeneral
BrandMicrofluidics
ModelMICROFLUIDIZER LV1 Series
CategoryComputer Hardware
LanguageEnglish