Microfluidics MICROFLUIDIZER LV1 Series - Motor Problems Table

Chapter 5: Troubleshooting
5-LV-1-4 8/3/11 LV1 User Manual 5-6
Motor Problems Table
Problem
Check the Following (in Sequential Order)
The motor stops or does
not start
Check that the Emergency Stop button is released
Check that the “RESET” (blue button) is activated.
Check the Master Power on/off switch circuit breaker
Check 1FU fuse (located in the electrical box. See Figure 2-2.)
Check motor circuit overload contactor reset, located in
electrical box (located in the electrical box. See Figure 2-2.)