Microfluidics MICROFLUIDIZER LV1 Series - default chapter; Interaction Chamber; Model LV1 Microfluidizer Processor Data Sheet; Model Specifications

Model LV1 Microfluidizer Data Sheet
F-LV-1-5 8/3/2011 LV1 User Manual F-1
Model LV1 Microfluidizer Processor Data Sheet
Serial #:
Customer:
Intensifier
Ratio:
21:1 (Hydraulic Pressure: Process Pressure)
Process Piston Diameter:
0.437 in. (11.1 mm)
Stroke Length:
2.50 in. (63.5 mm)
Volume/Stroke:
0.375 in.
3
(6 ml)
Process Piston Seal:
UHMWPE (Ultra High Molecular Weight)
Gasket/O-rings:
Viton (standard)
Interaction Chamber
Style:
Serial #:
Model Specifications
Model Number
LV1
Approximate Process Discharge Flow
6 ml/stroke at full 2.5 inch per stroke
Maximum Product Processing Pressure
2069 bar (30,000 psi)
Product Inlet Pressure
Gravity feed
Inlet Reservoir Size
10 ml (0.61 cu-in)
Maximum Operating Hydraulic Pressure
124 bar (1,800 psi)
Maximum Hydraulic Oil Temperature
140°F (60°C)
Process Fluid Cooling Water
Required to cool from 161°F (72°C) to
70°F (21°C) [process temperature rises
approximately 3°F (1.7°C) per 1,000 psi
(69 bar) applied pressure]
Ice Water or Dry Ice used with optional cooling coil and tray
assembly
Intensifier Stroke Length
63.5 mm (2.50 inches)
Approximate Stroke Displacement
6 ml (.375 in
3
)
Approximate Strokes per Minute
Approximately 2 per minute (operator dependent) (see Chapter 3)