microHAM MK2R User Manual

microHAM © 2008 All rights reserved
(10) – CW/FSK
RED color indicates the CW output to RADIO1 is active
GREEN color indicates the FSK output to RADIO1 is active
(11) – TX1
Adjusts drive level from the sound card or codec to RADIO1
(12) – PTT1/PTT2
RED color indicates PTT1 (RADIO1 front panel microphone jack PTT) is active
GREEN color indicates PTT2 (rear panel of RADIO1) is active
YELLOW color indicates both PTT1 + PTT2 are active
(13) – CW/FSK
RED color indicates the CW output to RADIO2 is active
GREEN color indicates the FSK output to RADIO2 is active
(14) – TX2
Adjusts drive level from the sound card or codec to RADIO2
(15) – PTT1/PTT2
RED color indicates when PTT1 (RADIO2 front panel microphone jack PTT) is active
GREEN color indicates when PTT2 (rear panel of RADIO2) is active
YELLOW color indicates when both PTT1 + PTT2 are active
(16) – RECORDING/DIGITAL LEFT
Controls the left channel audio level to SC2 Line In (MK2R) or “Digital” Audio Codec (MK2R+) for audio
recording or digital mode operation.
(17) – RECORDING/DIGITAL RIGHT
Controls the right channel audio level to SC2 Line In (MK2R) or “Digital” Audio Codec (MK2R+) for audio
recording or digital mode operation.
10

microHAM MK2R Specifications

General

Brand	microHAM
Model	MK2R
Category	Radio
Language	English