microHAM © 2008 All rights reserved
Installing microHAM USB Device Router
To install Router click on the Install USB Device
Router link on the installation CD or download the
most recent installation package from the web site:
www.microham.com/contents/en-us/d29.html
If you download an updated package, click on
"urouter_release_xx_xx.exe" (xx_xx is version) to
start the installation.
The Windows setup utility will start and ask into
which folder Router and its supporting files should
be installed. Note: unless you have a very strong
reason to install Router elsewhere, please accept
the default location.
When the Router installation is completed, click
"Finish" to launch Router for the first time. Then
plug in the USB cable and proceed to configuring
Router for your station and software.
17
To Next Page
Loading...
