1. Connect your AC power supply device or small household
appliance to one or more of the power station's two AC output
sockets (make sure the device to be supplied is turned off before
inserting the plug into the AC socket).
2. Make sure the main power is on, then press the AC button to turn
on the AC output，and the corresponding symbol will be displayed
on the LCD screen.
3. After use, press the AC button again, turn off the AC output of the
machine, and pull out the device plug from the AC output socket of
the machine.
Warning!
ELECTRIC SHOCK HAZARD: Improper operation of the AC output power sockets on
this machine may cause damage and personal injury. The AC output of the
inverter is the same as any traditional household AC wall socket, which may
cause electric shock injury or death!
6.If powering more than one device, start one device at a time to avoid
power surges or inverter overloads. The surge load of each device shall
not exceed the inverter's rated power.
7.When connecting inverter to the device with extension cord, the power
generated by the inverter will not be significantly decreased.For best
results, the extension cords should be 16AWG(1.31mm/ square) or
larger and not longer than 50 feet.
To Next Page
Loading...