EasyManuals Logo

Microlife 3AC1-AP User Manual

Microlife 3AC1-AP
45 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
b) Upper arm cuffs:
Type S101 for arm circumference 24–33.7 cm or
9.5” - 13.25” (included)
Type S102 for arm circumference 30.5 - 40.64 cm
12” - 16” (order as a special accessory)
Please Note:
Arm circumference should be measured with a measuring tape in the middle of the relaxed
upper arm. Do not force cuff connection into the opening. Make sure the cuff connection is
not pushed into the AC adapter port. If the cuff is too small, call for further infor-
mation. You may prefer to use one of our wrist type monitors.
4. Operation of your blood pressure monitor
4.1. Inserting the batteries
Insert batteries immediately after unpacking the unit. The
battery compartment is located on the back of the device
(see illustration).
a) Remove cover as illustrated
b) Insert the batteries (4 x size AA 1,5V),
observing the indicated polarity.
c) If a battery warning appears in the display,
the batteries are discharged and must be replaced.
6

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Microlife 3AC1-AP and is the answer not in the manual?

Microlife 3AC1-AP Specifications

General IconGeneral
BrandMicrolife
Model3AC1-AP
CategoryBlood Pressure Monitor
LanguageEnglish

Related product manuals