15
8. Care and Maintenance, Recalibration
a) Do not expose the device to either extreme temperatures,
humidity, dust or direct sunlight.
b) The cuff contains a sensitive air-tight bubble. Handle the
cuff carefully and avoid all types of straining through
twisting or buckling.
c) Clean the device with a soft, dry cloth. Do not use gasoline,
thinners or similar solvents. Carefully remove spots on the
cuff with a damp cloth and soapsuds. Do not wash the
cuff in a clothes or dishwasher!
d) Handle the tube carefully. Avoid stress from pulling,
pinching and sharp edges.
e) Do not drop the instrument or treat it roughly in any way.
Avoid strong vibrations.
f) Never open the device! This can negatively impact the
calibration! (accuracy)
Periodical re-calibration
Sensitive measuring devices must be checked for accuracy from time to time. We recommend a periodical
inspection of your device by an authorized microlife dealer every 2 years.
Your factory authorized Microlife dealer would be pleased to provide more information regarding
calibration.
To Next Page
Loading...
Need help?
General
