Microlife IR 1DE1 - How to Reload a New Probe Cover

6. How to Reload a New Probe Cover
NOTE:
• Inordertoavoidcross-contamination,pleasereloadanewprobe
coverforeachmeasurement.
• Pleasecheckiftheprobecoverisfittedonfirmlybeforeuse
(please see the diagrams below);Iftheprobecoverisbroken,
discardtheprobecoverandreloadanewoneimmediately.
(X) Incorrect (O) Correct
6
(3) Completelypushthe
probeintotheprobe
coverholderhole.
(4) Takeouttheprobewith
coverattachedtightly.
(1) Placeaprobecoveronto
thestoragecasehole
withpapersideupwards.
(2) Taketheunit,vertically
penetratetheprobeinto
the centerpartofthe
probecover.