Follow instructions for use. This document provides important product operation and safety information
regarding this Please read this document thoroughly before using the device and keep it for future reference.
This device may only be used for the purposes described in these instructions. The manufacturer cannot be
held liable for damage caused by the incorrect application.
Never immerse this device in water or other liquids. For cleaning please follow the instructions in the
«Cleaning and Disinfecting* section.
Do not use this device if you think it is damaged or notice anything unusual.
Never open this device.
A basic physiological effect called vasoconstriction can occur in the early stages of fever, resulting in cool skin
The recorded temperature using this thermometer can, therefore, be unusually low.
If the measurement result is not consistent with the patient’s finding or unusually low, repeat the measurement
every 15 minutes or double-check the result by another core body temperature
This device comprises sensitive components and must be treated with Observe the storage and operating
conditions described in the «Technical Specifications» section.
Ensure that children do not use this device unsupervised; some parts are small enough to be swallowed.
Do not use this device close to strong electromagnetic fields such as mobile telephones or radio installations.
Keep a minimum distance of 3.3 m from such devices when using this device.
Protect it from:
– extreme temperatures
– impact and dropping
– contamination and dust
– direct sunlight
– heat and cold
If the device is not going to be used for a prolonged period the batteries should be removed.
WARNING: The measurement results given by this device are not a diagnosis. It is not replacing the
need for the consultation of a physician, especially if not matching the patient’s symptoms. Do not rely on the
measurement result only, always consider other potentially occurring symptoms and the patient’s feedback.
Calling a doctor or an ambulance is advised if needed.
How this Thermometer measures Temperature
This thermometer measures infrared energy radiated from the forehead as well as objects. This energy is collected
through the lens and converted to a temperature value.
Control Displays and Symbols
All segments displayed 9: Press the START/IO button 7 to turn on the unit; all segments will be shown for 1
second.
Ready for measuring AT: When the unit is ready for measuring, the «°C» or «°F» icon will keep flashing while
the mode icon (body or object) will be displayed.
Measuring countdown BR: A 3-second countdown will be shown on the display (3, 2, 1), before each
measurement.
Measurement complete AK: The reading will be shown on the display 4 with the «°C» or «°F» icon and the
mode icon steady. The unit is ready for the next measurement as soon as the «°C» or «°F» icon is flashing
again.
Low battery indicator AN: When the unit is turned on, the «battery» icon will keep flashing to remind the user to
replace the batteries.
Setting Date, Time, and Beeper Functions
Setting the date and time
Setting the date and time
1. After the new batteries are fitted, the year number flashes in the display25. You can set the year by pressing the
M-button 5. To confirm and then set the month, press the MODE button 6.
2. Press the M-button 5 to set the month. Press the MODE button6 to confirm and then set the day.
To Next Page
Loading...
