°F.
Ambient temperature too low 21: Displays «AL» when ambient temperature is lower than 15.0 °C / 59.0 °F in
body mode or lower than 5.0 °C / 41.0 °F in object mode.
Error function display 22:
– «Er 0» / «Er 6»: The system has a malfunction.
– «Er 2»: Device is directly placed on the forehead / object.
Keep the measuring distance of 1-5 cm. Do not touch the bottom side (sensing area) of the measuring
sensor.
Blank display 23: Check if the batteries have been inserted correctly. Also check polarity (<+> and <->) of the
batteries.
Flat battery indicator 24: If only «battery» icon is shown onthe display, the batteries should be replaced
immediately.
Cleaning and Disinfecting
Use an alcohol swab or cotton tissue moistened with alcohol (70% Isopropyl) to clean the thermometer casing and
the measuring sensor. Ensure that no liquid enters the interior of the device. Never use abrasive cleaning agents,
thinners or benzene for cleaning and never immerse the device in water or other cleaning liquids. Take care not to
scratch the surface of the sensor lens and the display.
Battery Replacement
This device is supplied with 2 new, long-life 1.5V, size AAA batteries. Batteries need replacing when this icon
«battery» 24 isthe only symbol shown on the display.
Remove the battery cover 27 by sliding it in the direction shown.
Replace the batteries – ensure correct polarity as shown by the symbols in the compartment.
Batteries and electronic devices must be disposed of in accordance with the locally applicable regulations, not
with domestic waste.
Guarantee
This device is covered by a 5 year guarantee from the date of purchase. During this guarantee period, at our
discretion, Microlife will repair or replace the defective product free of charge.
Opening or altering the device invalidates the guarantee.
The following items are excluded from the guarantee:
Transport costs and risks of transport.
Damage caused by incorrect application or non-compliance with the instructions for use.
Damage caused by leaking batteries.
Damage caused by accident or misuse.
Packaging/storage material and instructions for use.
Regular checks and maintenance (calibration).
Accessories and wearing parts: Battery.
Should guarantee service be required, please contact the dealer from where the product was purchased, or your
local Microlife service. You may contact your local Microlife service through our website:
www.microlife.com/support
Compensation is limited to the value of the product. The guarantee will be granted if the complete product is returned
with the original invoice. Repair or replacement within guarantee does not prolong or renew the guarantee period.
The legal claims and rights of consumers are not limited by this guarantee.
Technical Specifications
Type: Non Contact Thermometer NC 200
Measurement Body mode: 34.0 – 43 °C / 93.2 – 109.4 °F
To Next Page
Loading...
