EasyManuals Logo

Microlife NEB 50 User Manual

Microlife NEB 50
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
5
The filter should be continually
checked for cleanliness and replaced if
dirty, or after a maximum of 3 months
use. Spare filters are provided with the
device. To replace the filter, open the
compartment on the bottom side of the
device marked «Open» and exchange
the filter as shown.
5. Malfunctions and actions to take
Malfunction Action
The device cannot be switched on.
The nebuliser only functions poorly or
not at all.
The service team at Microlife will be pleased to provide assistance if you
have any questions or problems!
Check whether the device is
correctly plugged into the
electricity supply.
The device has switched off
automatically due to overheating.
Wait until it has cooled down.
1. Check whether the air hose is
correctly connected at both ends.
2. Make sure that the air hose is not
kinked or blocked.
3. Check whether the nebuliser is
correctly assembled.
4. Make sure that medication has
been added.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Microlife NEB 50 and is the answer not in the manual?

Microlife NEB 50 Specifications

General IconGeneral
BrandMicrolife
ModelNEB 50
CategoryMedical Equipment
LanguageEnglish

Related product manuals