3. Cleaning
The nebuliser, face mask and mouthpiece may only be use by one
person. After application, all parts must be taken apart and rinsed under
flowing water. Then place all parts on a clean paper towel and leave to dry.
• Never immerse components into hot water!
• The device must not come into contact with water or heat!
The device and the air hose should be wiped out once a day with a clean,
moist cloth – the device must not be plugged into the electricity supply
during this process!
4. Maintenance, care and service
You can procure all necessary spare parts from your dealer or pharmacist, or
please contact Microlife directly for details of your local Microlife supplier.
You will find detailed user information on our products and services at
www.microlife.com
We recommend replacing the nebuliser, mouthpiece and masks after 3 months
use.
4
To Next Page
Loading...
